WRITEC

Scicos Block

WRITEC_f - Scicos "write to C binary file" block

This block allows user to write datas in a C binary file.

Input size : a scalar, the size of the input
Output file name : a character string defining the path of the file
Output Format : a character string defining the format to use
"l","s","ul","us","d","f","c","uc" : for reading respectively long, ashort, unsigned long, unsigned short, double, float, char and unsigned char. If required by the swap mode, the bytes which are read are automatically swapped if necessary (by checking little-endian status) in order to produce machine independent binary files ( in little-endian mode).
"ull","uls","ubl","ubs", : can be used for reading respectively unsigned little-endian long or short and unsigned big-endian long or short.
"dx","fx","lx","sx" : with x=b or x=l can be used for reading double, float, long or short as big or little endian.
Buffer size : To improve efficiency it is possible to buffer the input data. read on the file is only done after each Buffer size call to the block.
Swap mode : With Swap mode=1 the file is supposed to be coded in "little endian IEEE format" and data are swaped if necessary to match the IEEE format of the processor. If Swap mode=0 then automatic bytes swap is disabled.