Scilab Function

eqiir - Design of iir filters

### Calling Sequence

[cells,fact,zzeros,zpoles]=eqiir(ftype,approx,om,deltap,deltas)

### Parameters

• ftype : filter type ('lp','hp','sb','bp')
• approx : design approximation ('butt','cheb1','cheb2','ellip')
• om : 4-vector of cutoff frequencies (in radians) om=[om1,om2,om3,om4], 0 <= om1 <= om2 <= om3 <= om4 <= pi. When ftype='lp' or 'hp', om3 and om4 are not used and may be set to 0.
• deltap : ripple in the passband. 0<= deltap <=1
• deltas : ripple in the stopband. 0<= deltas <=1
• cells : realization of the filter as second order cells
• fact : normalization constant
• zzeros : zeros in the z-domain
• zpoles : poles in the z-domain

### Description

Design of iir filter interface with eqiir (syredi)

The filter obtained is h(z)=fact*product of the elements of cells.

That is hz=fact*prod(cells(2))./prod(cells(3))

### Examples

```[cells,fact,zzeros,zpoles]=...
eqiir('lp','ellip',[2*%pi/10,4*%pi/10],0.02,0.001)
transfer=fact*poly(zzeros,'z')/poly(zpoles,'z')
```