Go to the first, previous, next, last section, table of contents.

Installing Octave

Here is the procedure for installing Octave from scratch on a Unix system.

Run the shell script `configure'. This will determine the features your system has (or doesn't have) and create a file named `Makefile' from each of the files named `Makefile.in'. Here is a summary of the configure options that are most frequently used when building Octave:

--prefix=prefix
Install Octave in subdirectories below prefix. The default value of prefix is `/usr/local'.
--srcdir=dir
Look for Octave sources in the directory dir.
--with-f2c
Use f2c even if a Fortran compiler is available.
--with-g77
Use g77 to compile Fortran code.
--enable-shared
Create shared libraries. If you are planning to use --enable-lite-kernel or the dynamic loading features, you will probably want to use this option. It will make your `.oct' files much smaller and on some systems it may be necessary to build shared libraries in order to use dynamically linked functions. You may also want to build a shared version of libstdc++, if your system doesn't already have one. Note that a patch is needed to build shared versions of version 2.7.2 of libstdc++ on the HP-PA architecture. You can find the patch at ftp://ftp.cygnus.com/pub/g++/libg++-2.7.2-hppa-gcc-fix.
--enable-dl
Use dlopen and friends to make Octave capable of dynamically linking externally compiled functions. This only works on systems that actually have these functions. If you plan on using this feature, you should probably also use --enable-shared to reduce the size of your `.oct' files.
--enable-shl
Use shl_load and friends to make Octave capable of dynamically linking externally compiled functions. This only works on systems that actually have these functions (only HP-UX systems). If you plan on using this feature, you should probably also use --enable-shared to reduce the size of your `.oct' files.
--enable-lite-kernel
Compile smaller kernel. This currently requires the dynamic linking functions dlopen or shl_load and friends so that Octave can load functions at run time that are not loaded at compile time.
--without-blas
Compile and use the generic BLAS and LAPACK versions included with Octave. By default, configure first looks for BLAS and LAPACK matrix libraries on your system, including optimized BLAS implementations such as the free ATLAS 3.0, as well as vendor-tuned libraries. (The use of an optimized BLAS will generally result in several-times faster matrix operations.) Only use this option if your system has BLAS/LAPACK libraries that cause problems for some reason. You can also use --with-blas=lib to specify a particular BLAS library -llib that configure doesn't check for automatically.
--help
Print a summary of the options recognized by the configure script.
See the file `INSTALL' for more information about the command line options used by configure. That file also contains instructions for compiling in a directory other than where the source is located.
Run make. You will need a recent version of GNU Make. Modifying Octave's makefiles to work with other make programs is probably not worth your time. We recommend you get and compile GNU Make instead. For plotting, you will need to have gnuplot installed on your system. Gnuplot is a command-driven interactive function plotting program. Gnuplot is copyrighted, but freely distributable. The `gnu' in gnuplot is a coincidence--it is not related to the GNU project or the FSF in any but the most peripheral sense. To compile Octave, you will need a recent version of GNU Make. You will also need g++ 2.7.2 or later. Version 2.8.0 or egcs 1.0.x should work. Later versions may work, but C++ is still evolving, so don't be too surprised if you run into some trouble. It is no longer necessary to have libg++, but you do need to have the GNU implementation of libstdc++. If you are using g++ 2.7.2, libstdc++ is distributed along with libg++, but for later versions, libstdc++ is distributed separately. For egcs, libstdc++ is included with the compiler distribution. If you plan to modify the parser you will also need GNU bison and flex. If you modify the documentation, you will need GNU Texinfo, along with the patch for the makeinfo program that is distributed with Octave. GNU Make, gcc, and libstdc++, gnuplot, bison, flex, and Texinfo are all available from many anonymous ftp archives. The primary site is ftp.gnu.org, but it is often very busy. A list of sites that mirror the software on ftp.gnu.org is available by anonymous ftp from ftp://ftp.gnu.org/pub/gnu/GNUinfo/FTP. If you don't have a Fortran compiler, or if your Fortran compiler doesn't work like the traditional Unix f77, you will need to have the Fortran to C translator f2c. You can get f2c from any number of anonymous ftp archives. The most recent version of f2c is always available from netlib.att.com. On an otherwise idle Pentium 133 running Linux, it will take somewhere between 1-1/2 to 3 hours to compile everything, depending on whether you are building shared libraries. You will need about 100 megabytes of disk storage to work with (considerably less if you don't compile with debugging symbols). To do that, use the command
```
make CFLAGS=-O CXXFLAGS=-O LDFLAGS=
```
instead of just `make'.
If you encounter errors while compiling Octave, first check the list of known problems below to see if there is a workaround or solution for your problem. If not, see section Known Causes of Trouble, for information about how to report bugs.
Once you have successfully compiled Octave, run `make install'. This will install a copy of octave, its libraries, and its documentation in the destination directory. As distributed, Octave is installed in the following directories. In the table below, prefix defaults to `/usr/local', version stands for the current version number of the interpreter, and arch is the type of computer on which Octave is installed (for example, `i586-unknown-gnu').

`prefix/bin'
Octave and other binaries that people will want to run directly.
`prefix/lib'
Libraries like libcruft.a and liboctave.a.
`prefix/share'
Architecture-independent data files.
`prefix/include/octave'
Include files distributed with Octave.
`prefix/man/man1'
Unix-style man pages describing Octave.
`prefix/info'
Info files describing Octave.
`prefix/share/octave/version/m'
Function files distributed with Octave. This includes the Octave version, so that multiple versions of Octave may be installed at the same time.
`prefix/lib/octave/version/exec/arch'
Executables to be run by Octave rather than the user.
`prefix/lib/octave/version/oct/arch'
Object files that will be dynamically loaded.
`prefix/share/octave/version/imagelib'
Image files that are distributed with Octave.

Installation Problems

This section contains a list of problems (and some apparent problems that don't really mean anything is wrong) that may show up during installation of Octave.

On some SCO systems, info fails to compile if HAVE_TERMIOS_H is defined int `config.h'. Simply removing the definition from `info/config.h' should allow it to compile.
If configure finds dlopen, dlsym, dlclose, and dlerror, but not the header file `dlfcn.h', you need to find the source for the header file and install it in the directory `usr/include'. This is reportedly a problem with Slackware 3.1. For Linux/GNU systems, the source for `dlfcn.h' is in the ldso package.
Building `.oct' files doesn't work. You should probably have a shared version of libstdc++. A patch is needed to build shared versions of version 2.7.2 of libstdc++ on the HP-PA architecture. You can find the patch at ftp://ftp.cygnus.com/pub/g++/libg++-2.7.2-hppa-gcc-fix.
On some alpha systems there may be a problem with the libdxml library, resulting in floating point errors and/or segmentation faults in the linear algebra routines called by Octave. If you encounter such problems, then you should modify the configure script so that SPECIAL_MATH_LIB is not set to -ldxml.
On FreeBSD systems Octave may hang while initializing some internal constants. The fix appears to be to use
```
options      GPL_MATH_EMULATE
```
rather than
```
options      MATH_EMULATE 
```
in the kernel configuration files (typically found in the directory `/sys/i386/conf'. After making this change, you'll need to rebuild the kernel, install it, and reboot.
If you encounter errors like
```
passing `void (*)()' as argument 2 of
  `octave_set_signal_handler(int, void (*)(int))'
```
or
```
warning: ANSI C++ prohibits conversion from `(int)' to `(...)'
```
while compiling `sighandlers.cc', you may need to edit some files in the gcc include subdirectory to add proper prototypes for functions there. For example, Ultrix 4.2 needs proper declarations for the signal function and the SIG_IGN macro in the file `signal.h'. On some systems the SIG_IGN macro is defined to be something like this:
```
#define  SIG_IGN  (void (*)())1
```
when it should really be something like:
```
#define  SIG_IGN  (void (*)(int))1
```
to match the prototype declaration for the signal function. This change should also be made for the SIG_DFL and SIG_ERR symbols. It may be necessary to change the definitions in `sys/signal.h' as well. The gcc fixincludes and fixproto scripts should probably fix these problems when gcc installs its modified set of header files, but I don't think that's been done yet. You should not change the files in `/usr/include'. You can find the gcc include directory tree by running the command
```
gcc -print-libgcc-file-name
```
The directory of gcc include files normally begins in the same directory that contains the file `libgcc.a'.

Some of the Fortran subroutines may fail to compile with older versions of the Sun Fortran compiler. If you get errors like

zgemm.f:
	zgemm:
warning: unexpected parent of complex expression subtree
zgemm.f, line 245: warning: unexpected parent of complex
  expression subtree
warning: unexpected parent of complex expression subtree
zgemm.f, line 304: warning: unexpected parent of complex
  expression subtree
warning: unexpected parent of complex expression subtree
zgemm.f, line 327: warning: unexpected parent of complex
  expression subtree
pcc_binval: missing IR_CONV in complex op
make[2]: *** [zgemm.o] Error 1

when compiling the Fortran subroutines in the `libcruft' subdirectory, you should either upgrade your compiler or try compiling with optimization turned off.

On NeXT systems, if you get errors like this:
```
/usr/tmp/cc007458.s:unknown:Undefined local symbol LBB7656
/usr/tmp/cc007458.s:unknown:Undefined local symbol LBE7656
```
when compiling `Array.cc' and `Matrix.cc', try recompiling these files without -g.
Some people have reported that calls to shell_cmd and the pager do not work on SunOS systems. This is apparently due to having G_HAVE_SYS_WAIT defined to be 0 instead of 1 when compiling libg++.
On NeXT systems, linking to `libsys_s.a' may fail to resolve the following functions
```
_tcgetattr
_tcsetattr
_tcflow
```
which are part of `libposix.a'. Unfortunately, linking Octave with -posix results in the following undefined symbols.
```
.destructors_used
.constructors_used
_objc_msgSend
_NXGetDefaultValue
_NXRegisterDefaults
.objc_class_name_NXStringTable
.objc_class_name_NXBundle
```
One kluge around this problem is to extract `termios.o' from `libposix.a', put it in Octave's `src' directory, and add it to the list of files to link together in the makefile. Suggestions for better ways to solve this problem are welcome!
If Octave crashes immediately with a floating point exception, it is likely that it is failing to initialize the IEEE floating point values for infinity and NaN. If your system actually does support IEEE arithmetic, you should be able to fix this problem by modifying the function octave_ieee_init in the file `lo-ieee.cc' to correctly initialize Octave's internal infinity and NaN variables. If your system does not support IEEE arithmetic but Octave's configure script incorrectly determined that it does, you can work around the problem by editing the file `config.h' to not define HAVE_ISINF, HAVE_FINITE, and HAVE_ISNAN. In any case, please report this as a bug since it might be possible to modify Octave's configuration script to automatically determine the proper thing to do.
After installing the binary distribution of Octave in an alternate directory, the Emacs command run-octave doesn't work. Emacs hangs in accept-process-output in inferior-octave-startup. This seems to be a problem with executing a shell script using the comint package. You can avoid the problem by changing the way Octave is installed to eliminate the need for the shell script. You can either compile and install Octave using the source distribution, reinstall the binary distribution in the default directory, or copy the commands in the octave shell script wrapper to your shell startup files (and the shell startup files for anyone else who is using Octave) and then rename the file `octave.bin' to be `octave'.

Go to the first, previous, next, last section, table of contents.